1building there should be,
besides the four long walls, seven transverse walls,
of which the first is constructed from the upper end of the first long wall to
the upper end of the second long wall; the second proceeds from the end
of this to the end of the third long wall; the third likewise from this end of
the last extends to the end of the fourth long wall; the fourth leads from
the lower end of the first long wall to the lower end of the second long wall;
the fifth extends from the end of this to the end of the third long wall; the
sixth extends from this last end to the end of the fourth long wall; the
seventh divides into two parts the space between the third and fourth long
walls.
of which the first is constructed from the upper end of the first long wall to
the upper end of the second long wall; the second proceeds from the end
of this to the end of the third long wall; the third likewise from this end of
the last extends to the end of the fourth long wall; the fourth leads from
the lower end of the first long wall to the lower end of the second long wall;
the fifth extends from the end of this to the end of the third long wall; the
sixth extends from this last end to the end of the fourth long wall; the
seventh divides into two parts the space between the third and fourth long
walls.
To return to the back part of the building, in which, as I said, are the
bellows6, their frames, the machinery for compressing them, and the instru
ment for distending them. Each bellows consists of a body and a head.
The body is composed of two “boards,” two bows, and two hides. The
upper board is a palm thick, five feet and three palms long, and two and a half
feet wide at the back part, where each of the sides is a little curved, and it is
a cubit wide at the front part near the head. The whole of the body of the
bellows tapers toward the head. That which we now call the “board”
consists of two pieces of pine, joined and glued together, and of two strips of
linden wood which bind the edges of the board, these being seven digits
wide at the back, and in front near the head of the bellows one and a half
digits wide. These strips are glued to the boards, so that there shall be less
damage from the iron nails driven through the hide. There are some people
who do not surround the boards with strips, but use boards only, which
are very thick. The upper board has an aperture and a handle; the
aperture is in the middle of the board and is one foot three palms distant
from where the board joins the head of the bellows, and is six digits long and
four wide. The lid for this aperture is two palms and a digit long and wide,
and three digits thick; toward the back of the lid is a little notch cut
into the surface so that it may be caught by the hand; a groove is cut out
of the top of the front and sides, so that it may engage in mouldings a palm
wide and three digits thick, which are also cut out in a similar manner under
the edges. Now, when the lid is drawn forward the hole is closed, and
when drawn back it is opened; the smelter opens the aperture a little so that
the air may escape from the bellows through it, if he fears the hides might be
burst when the bellows are too vigorously and quickly inflated; he, however,
closes the aperture if the hides are ruptured and the air escapes. Others
perforate the upper board with two or three round holes in the same place as
the rectangular one, and they insert plugs in them which they draw out
bellows6, their frames, the machinery for compressing them, and the instru
ment for distending them. Each bellows consists of a body and a head.
The body is composed of two “boards,” two bows, and two hides. The
upper board is a palm thick, five feet and three palms long, and two and a half
feet wide at the back part, where each of the sides is a little curved, and it is
a cubit wide at the front part near the head. The whole of the body of the
bellows tapers toward the head. That which we now call the “board”
consists of two pieces of pine, joined and glued together, and of two strips of
linden wood which bind the edges of the board, these being seven digits
wide at the back, and in front near the head of the bellows one and a half
digits wide. These strips are glued to the boards, so that there shall be less
damage from the iron nails driven through the hide. There are some people
who do not surround the boards with strips, but use boards only, which
are very thick. The upper board has an aperture and a handle; the
aperture is in the middle of the board and is one foot three palms distant
from where the board joins the head of the bellows, and is six digits long and
four wide. The lid for this aperture is two palms and a digit long and wide,
and three digits thick; toward the back of the lid is a little notch cut
into the surface so that it may be caught by the hand; a groove is cut out
of the top of the front and sides, so that it may engage in mouldings a palm
wide and three digits thick, which are also cut out in a similar manner under
the edges. Now, when the lid is drawn forward the hole is closed, and
when drawn back it is opened; the smelter opens the aperture a little so that
the air may escape from the bellows through it, if he fears the hides might be
burst when the bellows are too vigorously and quickly inflated; he, however,
closes the aperture if the hides are ruptured and the air escapes. Others
perforate the upper board with two or three round holes in the same place as
the rectangular one, and they insert plugs in them which they draw out
zoom in
zoom out
zoom area
full page
page width
set mark
remove mark
get reference
digilib